High efficiency organic antibacterial masterbatch HB104F, ABS flame retardant masterbatch HB119, antibacterial masterbatch HB1042, antistatic masterbatch HB702, PPR functional masterbatch HB2005
Home>Solution
  • Film packaging solutions
  • Drink/Flavouring/Daily necessities packaging solutions
  • Pharmaceutical packaging solutions
  • Make-up packaging solutions
  • Thermal forming sheet solutions
  • Injection molding product solutions
  • Product /Material
    Blown Film / LLDPE
    Blown Film / Hdpe
    Cast Film / CPP
    Bopet / BOPP
    Bopet /BOPA
    FAQ & Application Requirements

    1、LLDPE film needs further improvement of transparency.

    2、Preservative film needs to achieve cold/hot anti-frog.

    3、Metal protective film needs to improve adhesive property.

    4、Metal protective film needs anti crystal point and carbon deposition prevention.

    5、Film needs slipping and low surface.

    1、With not enough barrier property, film needs to increase thickness to ensure product shelf life.

    1、The film transparency is not enough.

    2、Serious watermark on high transparent film surface .

    3、Film needs low surface friction coefficient at normal temperature.

    4、Film needs to eliminate thick corona to adjust to high speed packaging.

    5、Film needs low surface friction coefficient at high temperature (80℃, film& metal) to adjust to high speed packaging.

    6、Transparent film needs anti-adhesion.

    7、White film needs to provide high shading light.

    1、The film transparency is not enough.

    2、Film needs low surface friction coefficient at normal temperature.

    3、Film needs to eliminate thick corona to adjust to high speed packaging.

    4、Film needs low surface friction coefficient at high temperature (80℃, film & metal) to adjust to high speed packaging.

    5、Transparent film needs anti-adhesion.

    1、To prevent formation of large spherical crystal and gel, to control broken film, fish eye and spot formation; to prevent adhesion between films, achieving opening improvement of film to adjust high speed printing and packaging; to improve film thickness uniformity and glossiness.

    Solution

    1、To addHB1022 and 1065 into LLDPE to improve transparency of LLDPE film.

    2、To add HB9035 or HB9036 to provide cold/ hot anti-frog ability.

    3、To add HB6660 to improve to improve adhesive property.

    4、To add HB1065 to reduce crystal point, prevent carbon deposition and improve production efficiency.

    5、To add HB7031 to improve open slipping property for LLDPE film.

    1、To add HB1028 to achieve that barrier property of gas and oil could be improved by 20-40% , shelf life could be extended by 50% and film thickness could be reduced by more than 20%..

    1、To add HB6002 and HB8010 to increase transparency and glossiness obviously of CPP casting film.

    2、To add HB8103 to visibly eliminate CPP casting film watermark(water flow).

    3、To add HB1076 to improve slipping and opening of CPP casting film.

    4、To add HB7025 to visibly eliminate CPP casting films static and to be anti-dust.

    5、To add HB9615 to reach COF≤0.2 of film and metal at normal temperature/80℃.

    6、To add HB9043 to eliminate effectively the adhesion between films.

    7、HB370 provides good whiteness, dispersion and hiding power.

    1、To add HB6002 and HB8010 to increase transparency and glossiness obviously of CPP casting film.

    2、To add HB1076 to improve slipping and opening of CPP casting film.

    3、To add HB7025 to visibly eliminate CPP casting films static and to be anti-dust.

    4、To add HB9615 to reach COF≤0.2 of film and metal at normal temperature/80℃.

    5、To add HB9043 to eliminate effectively the adhesion between films.

    1、F-35 multifunctional slipping masterbatch is an essential raw material for BOPA production.

  • Product / material
    PP HDPE
    HDPE
    PP
    FAQ & Application Requirements

    1、The internal and external dimensions of bottle caps with color blue,green, red or yellow are under size.

    2、The cap has big change in size before and after filling drinks with high temperature.

    3、Easy to adhere to mold and hard to remove from mold.

    4、Flavouring bottle cap used frequently is easy to power and wear.

    5、The barrier property of HDPE cap is too low to keep big smell from flavouring.

    6、Lagging equipment，long time for size setting，low production efficiency.

    7、The ring and hinge are easily broken.

    1、 Packaging bottle needs good barrier property to keep smell stored and extend the shelf life.

    1、Packaging material needs to be temperature resistant and anti deformation when steam sterilizing or being filled.

    2、The transparent bottle with liquid needs high toughness and to pass 1.5 m dropping down test after being filled.

    Solution

    1、To add HB1024 to make internal and external dimensions of bottle caps bigger.

    2、To add HB1015 or HB1024 to solve the dimensional variety and tightness problems because of filling drinks with high temperature.

    3、To add HB7030，the speed of removing from mold of bottle cap could be improved greatly.

    4、To add HB7035，the wear resistance and friction coefficient will be improved greatly.

    5、To add HB1028 into HDPE，the barrier property of HDPE cap could be improved by 20-40%.

    6、To add HB1015 or HB1024 to speed up size setting and improve production efficiency greatly.

    7、To add HB6032 to improve tensile elongation and toughness greatly.

    1、To add HB1028 into HDPE to achieve barrier property increased by 20-40%.

    1、To add HB1015, the temperature resistance of PP bottles could be increased by 20-25 degrees.

    2、To add HB6038 into transparent PP to greatly improve toughness and 3L bottle with high transparency passes 1.5 m dropping down test after being filled.

  • Product / material
    Medicament bottle /HDPE
    Syringe/PP
    FAQ & Application Requirements

    1、Packaging material needs barrier property to keep smell stored to ensure the shelf life of medicine.

    1、Products need transparency and dimensional stability.

    Solution

    1、To add HB1028 into HDPE to improve barrier property by 20-40%.

    1、To add HB1035 to improve product transparency and dimensional stability.

  • Product /material
    Make-up bottle cap /PP HDPE
    Make-up bottle/HDPE
    Make-up bottle / PP HDPE
    FAQ & Application Requirements

    1、The post deformation of PP bottle cap is big with unstable size and assembly matching is not good.

    2、The internal and external dimensions of PP\HDPE bottle caps with color blue, green, red or yellow are under size.

    3、Easy to adhere to mold and hard to remove from mold.

    4、Flavouring bottle cap used frequently is easy to power and wear.

    5、Lagging equipment，long time for size setting，low production efficiency.

    1、Packaging bottle needs good barrier property to keep smell stored and ensure the shelf life.

    1、The transparent PP bottle needs high toughness and to pass dropping down test after being filled.

    2、HDPE bottle needs barrier property to ensure the shelf life of medicine.

    Solution

    1、To add HB1015 to reduce post deformation of PP cap, make size stable and improve efficiency of size setting.

    2、To add HB1024 to make internal and external dimensions of bottle caps bigger.

    3、To add HB7030，the speed of removing from mold of bottle cap could be improved greatly.

    4、To add HB7035，the wear resistance and friction coefficient will be improved greatly.

    5、To add HB1015 or HB1024 to speed up size setting and improve production efficiency greatly.

    1、 To add HB1028 into HDPE to achieve barrier property increased by 20-40%.

    1、To add HB6038 into transparent PP to greatly improve toughness and to pass dropping down test after being filled with high transparency.

    2、To add HB1028 into HDPE to improve barrier property by 20-40%.

  • Product /material
    Thermal forming sheet (disposable cup/ lunch-box)/PP
    Functional sheet/ PP
    FAQ & Application Requirements

    1、Thermal forming transparent products need to improve transparency.

    2、hermal forming transparent products need to improve rigidity.

    3、Products need to improve toughening and low temperature resistance.

    4、Products folded need anti-adhesion and opening.

    1、Products need anti-flaming, extrusion and thermal forming.

    Solution

    1、To add HB6002 or HB3810 to improve greatly transparency of cup products.

    2、To add HB6002 to improve rigidity and anti - press strength.

    3、To add HB6032 to improve toughening and low temperature resistance.

    4、To add HB1076 to easily separate the cups or boxes stacked tight.

    1、To add HB1098 to provide PP sheet V0 anti-flaming and good processing performance.

  • Product /material
    High gloss high quality thick-walled product or large size product /PP
    High gloss high quality products /ABS HIPS
    Products with functional requirements /PE PP ABS HIPS
    FAQ & Application Requirements

    1、Long molding cycle, low production efficiency.

    2、Large post deformation, unstable dimension.

    3、Large shrinkage , serious shrinkage mark.

    4、Product rigidity is not enough, too soft.

    5、Product needs to improve surface hardness and scratch resistance.

    6、Product toughness is not enough and needs to enhance impact strength at low temperature.

    7、Product weight is not enough.

    8、The heat resistance temperature of product material is not enough.

    1、Product toughness is not enough with low impact strength so the screw is easy to burst and the drop test fails.

    2、Product UV and weather resistance is bad and yellowing easily.

    3、Product weight is not enough or need to reduce material cost.

    1、Anti-flaming requirement

    2、Antibacterial requirement

    3、Anti-static requirement

    4、Hyper-transparent requirement

    5、Anti-weathering requirement

    Solution

    1、To add HB101 to reduce cooling setting time by 20-40% and improve production efficiency greatly

    2、To add HB101 to eliminate post deformation and improve dimension stability.

    3、To add HB201/HB301/HB803 to solve shrinkage problem when large shrinkage exists.

    4、To add HB101/HB201/HB301/HB803 to improve product rigidity.

    5、To add HB101 to increase product surface hardness.

    6、To add HB603 to enhance product toughness, impact strength at low temperature and transparency.

    7、To add HB201 or HB301 to increase product weight.

    8、To add HB101 to increase PP heat resistance temperature by 20-25℃;

    1、To add HB601 into HIPS products to enhance impact strength and toughness.To add HB602 into ABS products to enhance impact strength and toughness..

    2、To add weather resistance masterbatch HB107 to improve product weather resistance and color stability.

    3、To add HB202 to increase product weight and reduce material cost without influence on glossiness and toughness of high gloss HIPS and ABS.

    1、To add anti-flaming masterbatch HB109 into PP product, additive amount 5% to reach V2 degree, high glossiness, low specific gravity, low precipitation, in conformity with regulations and standards of ROHS and REACH.

    2、Silver ion antibacterial masterbatch HB104, suitable for PE, PP, ABS, HIPS, in line with food sanitary grade, additive amount 4%, sterilizing rate above 90% (11 kinds of normal bacteria)

    3、Anti-static masterbatch HB106 could eliminate product surface static and decrease surface resistance.

    4、Hyper-transparent masterbatch HB103C could highly improve the transparency of homopolymerized PP which could take place of PC by adding HB103C in heat resistant and transparent occasions, thus reducing cost.

    5、Weather resistance masterbatch HB107 could improve product UV resistance and aging resistance.

PRODUCT CASE

  • B104 organic antibacterial masterbatch applied to High efficiency & low cost antibiosis case

    HB104 antibacterial masterbatch is suitable for ABS, HIPS and PP, the recommended additive amount is 1-2%, achieving good antibacterial effect, environmental protection without pollution, as an antibacterial masterbatch for eternal. Product could also be mildew proof by adding additive amount 2%, suitable for application of humidifier water tank. HB104 is easy for purchase, low price, reducing cost for antibiosis, in line with variety of rules and announcement, such as American EPA FIFRA, EU EINECS/ELINCS, Australia ACOIN, Japanese ENCS, Korean KOREAN INVENTORY, etc.

  • Pure PP by adding high gross & heat resistance masterbatch HB201 could take place of high gross & heat resistancePP, reducing cost

    Products who require high quality in appearance, heat resistance and size setting needs to add high gross & size setting masterbatch HB201, which has variety of features as followed: High gross, high whiteness, high dispersity, improving dimensional stability, reducing warping deformation and shrinkage of products, shortening the molding cycle, improving the molding efficiency of products, improving rigidity and surface hardness of products, improving the impact strength...

  • Pure PP products by adding HB101 to improve production efficiency

    The features of HB101 as followed: eliminating warpage and shrinkage deformation, reducing presence of defective products, keeping stability of excellent dimension, increasing the heat resistance temperature of PP; improving the rigidity and surface hardness of products; enhancing product surface glossiness; eliminating density bubble;...

  • Ordinary PP by adding flexibilizer could take place of high impact modifier

    Suitable for products with low temperature impact requirements As PP flexibilizer, the features of HB603 as followed: improving impact strength and tensile elongation at break of PP; increasing PP heat resistance; improving toughness, easy to be added and ratio could be adjusted flexibly to solve various of tensile problems; the glossiness and transparency of PP is not affected.

  • Silk-screen products by adding laser marking masterbatch into raw material to reduce cost and improve production efficiency

    Plastic parts to be marked of electrical appliances by adding 1% of laser marking masterbatch, which has variety of features as followed: Non contact machining, permanent marking; high precision, fast marking speed, clear and high marking reliability; optional high resolution micro label; non-pollution; easy operation, high anti - counterfeit; strong traceability; high speed automatic marking; short processing cycle; production cost being much lower than traditional ink printing. For example, 30g ABS product,..

  • Pure PP by adding antiflaming masterbatch with reducing cost could take place of PP flame retardant material

    The features of PP antiflaming masterbatch as followed: small additive amount and good flame retardant effect; no precipitation of flame retardant and good mechanical performance; good thermal stability and available to be reprocessed; environmental production and no dust pollution; stable color and could be directly used to equipment without corrosion. Homopolymerized PP with additive amount 6% of antiflaming masterbatch to reach 1.6mm V0 degree;...

  • ABS toughening

    Suitable for the products with low temperature impact requirement or failing in drop test in winter As ABS flexibilizer, the features of HB602 as followed: improving impact strength and tensile elongation at break of ABS; easy to be added and ratio could be adjusted flexibly to solve various of tensile problems, the glossiness of ABS is not affected.

  • PC raw material by adding PC antiflaming masterbatch could take place of PC flame retardant material, reducing cost

    Easy to be added; low additive amount; good flame retardant effect; low cost; non-halogen environmental protection; transparent & antiflaming, additive amount 2-4% to reach 1.6mm V0 degree.

  • To further improve heat resistance temperature and surface hardness of HJ730L PP temperature resistant , ensuring the temperature resistant and surface scratch resistant requirements of fryer and bread maker shell

    The shell of fryer requires high quality material, high heat resistance temperature, high glossiness, high surface hardness, rigidity and toughness meeting product demands; the heat resistance temperature and surface hardness of temperature resistant PP in the market will be lower. By adding transparent size setting & temperature resistant masterbatch HB101(1-2%),...

Keyword： antiflaming additive HB601-HIPS Flexibilizer HB119ABS Antiflaming Masterbatch Injection Molding Transparent Flexibilizer HB703-Slipping Masterbatch HB119ABS Antiflaming Masterbatch
Links： Sungyang International Donghua Machinery Guoxing Fubon Shanghai Jin Chi Industrial CO.,Ltd. Suining tongjia Chemical Fiber Jiaxing Shengbang Technology Co., Ltd
微信 扫一扫
Huabiao Plastic Technology Co.,Ltd Technical Support：中国丙纶网 |
如果本网站发布的文章或者图片或字体有侵权，请立即联系网站负责人进行删除，联系人：薛小姐 138 6101 6292，付小姐 153 1256 7839